Note:

You want to use a CAD file in your CAD system that was created by INA or FAG. INA and FAG CAD drawings and models are created with great care and the information is checked for accuracy. However, we do not know the installation situation and the operating conditions for the product. In addition, different representations may occur due to different configurations of the CAD systems.

Due to the constant further development of the products, we reserve the right to make changes to the product range and the product design. The product geometry is shown in simplified form and may deviate from the real product. INA and FAG CAD drawings and models do not constitute a guarantee of quality or durability in the legal sense and do not replace the usability of the products to be verified by you.

We reserve all rights to trademarks, brands, patents, drawings and models. The installation situation and the operating conditions for the product are not known to us; in addition, different representations may occur due to different configurations of the CAD systems. All our information, drawings, models or representations in your CAD system are provided without guarantee.

We therefore strongly recommend that:

• All relevant mounting dimensions should be checked using the information in the dimension drawing

• The suitability, performance capability and the expected life of the product should be checked using appropriate methods: calculation program

• The suitability of the product should be checked by means of tests

• In case of doubt, please consult our engineering service